Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to change the engine oil in a Suzuki GSX 1250FA, a very simple and quick operation. First, ensure that the engine is sufficiently cool for safety. Then, position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket spanner. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb in a Suzuki GSX 1250 FA?
How to Replace the Front Headlamp Bulb in a Suzuki GSX 1250 FA?
Gsx 1250 Fa In this tutorial, see how to replace the front headlamp bulb in a Suzuki GSX 1250 FA, an extremely simple and quick operation. First, ensure the key …
How to Replace the Battery on a Suzuki GSX 1250 FA
How to Replace the Battery on a Suzuki GSX 1250 FA
Gsx 1250 Fa Follow these steps to remove and replace the battery on a Suzuki GSX 1250 FA motorcycle. First, remove the rear seat and the rider's seat. Next, disc…
How to Replace the Windscreen on a Suzuki GSX 1250 FA?
How to Replace the Windscreen on a Suzuki GSX 1250 FA?
Gsx 1250 Fa To replace the windscreen on the Suzuki GSX 1250 FA, loosen the screws securing the instrument cluster to its housing so that it can be removed by di…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos