Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Suzuki
  4. : Sfv 650

Replacing Engine Oil and Oil Filter on Suzuki SFV 650 (2009-2015)

Model: Suzuki Sfv 650
Part: Engine oil

Video tutorial

Descriptive guide for replacing the engine oil and oil filter on a Suzuki SFV 650 from 2009 to 2015. Obtain 3 litres of Suzuki 4T SAE 10W40 oil and a K&N KN-138 oil filter. Position the bike on its side stand.

Start the engine, allow it to reach temperature, and then turn it off. Place a container for the used oil under the engine. Using a ratchet and a 17mm socket, unscrew the engine oil drain plug located under the engine on the left side.

Allow the oil to drain and clean the magnetic plug thoroughly. Using an oil filter wrench, unscrew the oil filter located in front of the engine.

Lubricate the seal of the new filter with oil and screw it on by hand. Then tighten it by a turn with the oil filter wrench.

Screw the oil drain plug back in. Unscrew the oil filler cap located on the engine casing on the right side. Pour in 2.5 litres of oil using a small funnel.

Start the engine for 5 minutes and then turn it off. Check the oil level through the inspection hole located below the filler cap. If necessary, add oil until it reaches the maximum level.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

V Storm 650 This guide shows you how to perform a service by changing the engine oil and oil filter on the Suzuki V Storm 650. First, place the motorcycle on the…
Klr 650 Let’s look at the instructions for changing the engine oil and oil filter during the regular maintenance service on a Kawasaki KLR 650. First, place …
V Storm 650 To change the engine oil on the Suzuki V-Strom 650, loosen the drain plug of the oil tank, positioning a container underneath to collect the used oil…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos