Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, you will see how to reset the service light on a Suzuki GSX 8S: this operation is done via the OBD port, so first, you need to find the 2-pin port located under the seat. Connect the two pins with a metal wire (or a short jumper), do not use exposed or long wires to avoid short circuits! Turn on the ignition, which will display the service mode. Use the handlebar buttons to access the settings menu and go to the Service option. Select the desired maintenance interval, confirm the reset, and the display will show a confirmation message. Once reset, remove the jumper from the connector, turn off, and restart the bike to check that the light has disappeared.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Suzuki GSX-8S?
How to reset the service on the Suzuki GSX-8S?
Gsx 8s In this tutorial we can see how to reset the service on the Suzuki GSX-8S, an extremely simple and quick operation, to be performed only once all sch…
How do you replace the exhaust pipe of the Suzuki GSX-8S?
How do you replace the exhaust pipe of the Suzuki GSX-8S?
Gsx 8s It will be possible to replace the exhaust of the Suzuki GSX-8S by loosening the screws that secure the exhaust terminal and widening the connecting …
How to Change the Engine Oil in a Suzuki GSX-8S?
How to Change the Engine Oil in a Suzuki GSX-8S?
Gsx 8s In this tutorial, you will see how to change the engine oil in a Suzuki GSX-8S, a very simple and quick operation. First, wait until the engine is su…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos