Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Gsf 1250

How to Replace the Transmission Kit on the Suzuki GSF 1250

Model: Suzuki Gsf 1250
Part: Drivetrain

Video tutorial

Today we will see how to replace the transmission kit on the Suzuki GSF 1250. To perform the replacement, lift the rear wheel so that it can turn freely, loosen the rear wheel chain to disconnect it from the sprocket. Remove the rear sprocket and the front sprocket by unscrewing the nut. Unscrew the bolts to remove the rear sprocket and fit the new one, tightening to the same number of teeth on the belt.

After fitting the rear sprocket, ensure it is aligned and tightened to the torque specified in the manual. Pass the chain around the sprocket and then move the wheel until you achieve the correct play of 20-30 mm tightened towards the axle.

Lubricate the chain along its entire length by spinning the wheel to distribute the grease well. After fitting the chain and ensuring it runs freely, fit the cover and lower the vehicle to perform a short road test.

It is important to lubricate the chain every 1,000 miles, especially if the vehicle is often used in dirty and wet conditions.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

How to Clean the Valves of a Suzuki GSF 1250?
How to Clean the Valves of a Suzuki GSF 1250?
Suzuki Gsf 1250 Today, you will learn how to clean the valves of a 2010 Suzuki GSF 1250. Place a container under the coolant reservoir as some liquid may spill when …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos