Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Clock

If on the display of the instrument panel of your Suzuki Swift you see the wrong time and you want to find out how to manually change it, just follow the following guide and apply what is described. First of all, get into the car and reach the driver's seat, then start the instrument panel and press the two buttons located below the tachometer and speedometer simultaneously. At this point, rotate the right button to change the hour. Press the same button to switch to minutes and repeat the same operation. Finally, press the button one last time to save the changes.

Posted on 10 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Suzuki Swift
How to set the time on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this short and simple guide, you will learn how to adjust and set the correct time on the Suzuki Swift. First, get inside the vehicle and turn on …
How to Set the Clock on the Suzuki Swift
How to Set the Clock on the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) To set the clock on the Suzuki Swift, first turn on the ignition. Once the ignition is on, press both buttons located on the dashboard of the Suzuki …
How to set the time on the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Following these brief and simple instructions, we will see how to change the time on the display of the instrument panel on the Suzuki Swift and the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos