Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Disconnect the main connector located behind the headlamp, then remove the round rubber cover from underneath the bonnet. Release the metal clip holding the LED H4 bulb in place, and you can now remove it. This tutorial uses the main bulb, the dipped beam, as an example, but the procedure is similar for any front bulb.

For fitting the new bulb, proceed in reverse: insert it, secure it with the metal clip, replace the rear cover, and finally reconnect the connector.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light and Bulbs of the Suzuki Swift
How to Replace the Rear Light and Bulbs of the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Today, let's look at the instructions for removing and replacing the rear light and its bulbs on the Suzuki Swift in simple steps. First, open the bo…
Remove the Headlight Bulbs on a Suzuki Swift
Remove the Headlight Bulbs on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Remove the headlight bulbs and replace them on a Suzuki Swift. Open the bonnet by pulling the lever located at the bottom right of the dashboard and …
Replacing the rear light of the Suzuki Swift
Replacing the rear light of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) This guide briefly outlines the instructions to remove and replace the rear light and its bulbs on the Suzuki Swift. First, move to the rear and open…

    Frequently Asked Questions

    • Swift 2010-2017 - How to replace a Suzuki Swift headlight bulb? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos