Do it yourself
| ||||
|
Suzuki Swift - Video tutorial
Model: Suzuki Swift
AZG, Rs41, MK 5
- Years 2010-2017 Today we will see the instructions for disassembling and replacing the rear light and its bulbs of the Suzuki Swift, in simple steps. First of all, we open the rear hatch of the trunk and start unscrewing the side screws of the light, using a socket wrench; then we disconnect the electrical connector of the bulbs, as shown in the video. At this point, we remove the light and separate the bulb holder from the lamp, replacing the bulbs if necessary; we correctly reassemble the new light and connect it, fixing the side screws!
Posted on 21 February 2024 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |