Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of the Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Tail light

Follow the procedure to remove and replace the rear light of the Suzuki Swift. First, open the boot and start unscrewing the two fixing screws located on the side of the rear light to detach it from the bodywork; then disconnect all the electrical connectors of the bulbs, removing them along with the bulb holder, as shown in the video. At this point, install the new rear light by placing all the bulbs inside it, applying the reverse procedure for reassembly!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear tail light of the Suzuki Swift - Maruti Swift
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Today's information will allow us to disassemble and replace the rear taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the …
How to Remove the Rear Light on Suzuki Swift
How to Remove the Rear Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the rear light on your Suzuki Swift damaged? Let's see how to replace it. Open the boot lid, unscrew the securing screws located on the side above…
How to Replace the Rear Light and Bulbs of the Suzuki Swift
How to Replace the Rear Light and Bulbs of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Today, let's look at the instructions for removing and replacing the rear light and its bulbs on the Suzuki Swift in simple steps. First, open the bo…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos