Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tail light of the Suzuki Swift - Maruti Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Tail light

Today's information will allow us to disassemble and replace the rear taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the rear trunk door and begin to unscrew the fixing screws we find on the sides of the rear light, using a socket wrench with extension; we gently detach the light and disconnect the electrical connector of the bulbs, as shown in the video. At this point, if necessary, we replace the brake light bulbs or the entire rear taillight, applying the reverse process for reassembly!

Posted on 6 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) .. the instrument panel on the Suzuki Swift and the Maruti Swift. First of all, get into the car and start by pressing and holding the button located on.. …
How to set the time on the Suzuki Swift
How to set the time on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) .. of the instrument panel of the Suzuki Swift and Maruti Swift. First of all, we get on board the car and start up the instrument panel; then we use the.. …
Replacing the rear light of the Suzuki Swift
Replacing the rear light of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) This guide briefly outlines the instructions to remove and replace the rear light and its bulbs on the Suzuki Swift. First, move to the rear and open…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos