Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Suzuki Swift?

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Tail light

To remove the rear light on a Suzuki Swift, open the boot lid and loosen the bolts located between the seal and the light itself. Once these are removed, begin to slide out the light by detaching the clips on the other side, allowing for complete extraction. Now, disconnect the connectors attached to the back of the light so that it can be replaced with a new part. This should be connected to the connector and secured in its housing with the appropriate bolts.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear tail light of the Suzuki Swift - Maruti Swift
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Today's information will allow us to disassemble and replace the rear taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the …
Replacing the Rear Fog Light Bulb on a Suzuki Swift
Replacing the Rear Fog Light Bulb on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide will show you how to remove and replace the rear fog light bulb on a Suzuki Swift. First, move to the rear and disconnect the electrical c…
How to Replace the Rear Light Bulb on a Suzuki Swift?
How to Replace the Rear Light Bulb on a Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the rear light bulb on a Suzuki Swift, open the boot and loosen the screws next to the light. Once the screws are loosened, you can pull t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos