Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Suzuki Swift?

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear lights on the Suzuki Swift, an extremely simple and fast operation. First of all, make sure that the vehicle is turned off, so that you can work safely.

Then, open the trunk door, locate the two bolts along the inner edge of the light in question, and unscrew them using a 10mm socket wrench. Next, grab the light, pull it towards you, and separate it from the body of the car. At this point, all that's left to do is remove the various bulbs and install the replacement following the reverse procedure.


Posted on 4 September 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Lights in the Suzuki Swift?
How to Replace the Rear Lights in the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) .. This tutorial shows how to replace the rear lights in the Suzuki Swift, a very simple and quick operation. Before proceeding,.. …
How to Remove the Rear Light on Suzuki Swift
How to Remove the Rear Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the rear light on your Suzuki Swift damaged? Let's see how to replace it. Open the boot lid, unscrew the securing screws located on the side above…
How to Remove the Rear Light on a Suzuki Swift?
How to Remove the Rear Light on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To remove the rear light on a Suzuki Swift, open the boot lid and loosen the bolts located between the seal and the light itself. Once these are remo…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos