|
Do it yourself
| |||
| ||||
How to replace the rear headlight of a Suzuki Swift?
Model: Suzuki Swift
MK 4, Rs41
- Years 2004-2010
To replace the rear light of a Suzuki Swift, start by turning off the engine and making sure the lights are off. Open the trunk and locate the back of the rear light you want to replace. Remove the inner protective cover, which is usually secured with clips or screws. Use a screwdriver, if necessary, to loosen the screws holding the light in place. Once the screws are removed, gently pull out the light towards you. Disconnect the electrical connector that connects the light to the car's electrical system. If you only need to replace the bulb, access the bulb holder, rotate it counterclockwise, and replace the burnt bulb with a new one of the same type. If you need to replace the entire light, connect the new light to the electrical connector, making sure it is securely attached. Reposition the light in its place and tighten the mounting screws. Put back the inner cover and make sure everything is securely in place. Finally, turn on the rear lights to verify that they are working properly.
Posted on 2 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Suzuki Swift
(2017-2024 /
MK 6, A2L)
In this brief guide, see the steps to remove and replace the rear light bulbs on a Suzuki Swift. First, open the boot lid and start unscrewing the fi…
Suzuki Swift
(2004-2010 /
MK 4, Rs41)
To replace the rear light bulb on a Suzuki Swift, open the boot and loosen the screws next to the light. Once the screws are loosened, you can pull t…
Suzuki Swift
(2004-2010 /
MK 4, Rs41)
Is the rear light on your Suzuki Swift damaged? Let's see how to replace it. Open the boot lid, unscrew the securing screws located on the side above…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.246
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |