Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Suzuki Grand Vitara?

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine

See other generations:
Video tutorial

To remove the engine from the Suzuki Grand Vitara, open the bonnet to access the components located within the engine bay: here, you will find the screws that secure the engine block to the appropriate supports. Once the fastening screws of the supports are loosened, disconnect all the pipes and connectors attached to the engine block: this will allow you to extract it from its housing and proceed to remove the cylinder head.

This way, you will have access to the components located within the engine block, which can then be replaced if necessary.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.0
How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.0
Suzuki Grand Vitara (2005-2015 / MK 2) Below are the instructions for removing and replacing the serpentine belt on a Suzuki Grand Vitara 2.0. First, open the bonnet of the vehicle and beg…
Replacing the Antenna on a Suzuki Grand Vitara
Replacing the Antenna on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Here are the instructions to remove and replace the antenna on the Suzuki Grand Vitara. First, move to the rear of the vehicle and start unscrewing t…
Removing the Front Differential of the Suzuki Grand Vitara
Removing the Front Differential of the Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) This guide provides instructions for removing and replacing the front differential of the Suzuki Grand Vitara. First, raise the vehicle and start by …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos