Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Valve Cover on a Suzuki Baleno?

Model: Suzuki Baleno MK 2 - Years 2015-2026
Part: Cylinder head

In this tutorial, you will learn how to replace the valve cover on the engine of a Suzuki Baleno. First, wait for the engine to cool completely, then open the bonnet, unscrew the bolts of the coils, and disconnect both the cables from the spark plugs and the two pipes located at the rear of the cylinder head. Next, unscrew all the fastening bolts of the cover around the perimeter, separate it from the engine block, and be careful not to let any dirt fall into the valve housing. Finally, position a new gasket if necessary, and refit the replacement by following the reverse procedure.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Baleno (2015-2026 / MK 2) Fortunately, replacing the button battery inside your Suzuki Baleno key is one of the simplest and quickest tasks you can do yourself. Here’s how. Fi…
Suzuki Baleno (2015-2026 / MK 2) If you want to replace the battery in your Suzuki Baleno key but don't know how, follow the steps outlined in this guide. First, obtain a small cross…
Suzuki Baleno (2015-2026 / MK 2) To replace the battery in a Suzuki Baleno, open the bonnet to access the components inside the engine bay. On the right side, you will find the batte…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos