Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on the Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Spark plugs

See other generations:
Video tutorial

Let's see how to replace the spark plugs on the Suzuki Ignis: start by disconnecting the electrical contacts from the coils; then unscrew the fastening screws of the coils; if you remove them all together, it is advisable to number them to ensure you put each one back in its housing, otherwise, you can do the job one at a time.

Then, using a socket with an extension, carefully remove the spark plugs, as it would be problematic if they fell into the duct.

Install the new ones with the same caution and then replace the coils, securing them with their screws: reconnect the electrical connector and you are all set.


Posted on 15 February 2026 by ScegliAuto


Related tutorials

How to Remove the Spark Plugs from Your Suzuki Ignis
How to Remove the Spark Plugs from Your Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) Do you want to remove the spark plugs from your Suzuki Ignis? This video details how to proceed. Pull the engine compartment release lever located at…
How to Set the Time on a Suzuki Ignis
How to Set the Time on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos