Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Differential of the Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 1 - Years 1999-2005
Part: Differential

This guide provides instructions for removing and replacing the front differential of the Suzuki Grand Vitara. First, raise the vehicle and start by removing the front wheels; then disconnect the arm from the wishbone by unscrewing the central bolt. At this point, drain the transmission oil by unscrewing the drain bolt, allowing it to drain into a container for about ten minutes; now disconnect the side joint pin of the differential by unplugging the electrical connector to remove it and replace it with the new one!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Differential Oil in a Suzuki Grand Vitara
How to Replace the Differential Oil in a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) In this video, learn how to change the differential oil in a Suzuki Grand Vitara. Position the car on a column lift and raise it to a comfortable hei…
How the Differential Lock Works on a Suzuki Grand Vitara
How the Differential Lock Works on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) In this video, you will see how to engage the differential lock on a Suzuki Grand Vitara: everything is controlled by a selector located on the centr…
How to replace the front wheel bearing of the Suzuki Grand Vitara 2.4
How to replace the front wheel bearing of the Suzuki Grand Vitara 2.4
Suzuki Grand Vitara (2005-2015 / MK 2) The following steps will illustrate the procedure for disassembling and replacing the front wheel bearing of the Suzuki Grand Vitara 2.4. First, lift…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos