Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to use the puncture repair kit on the Suzuki S-Cross

Model: Suzuki S Cross MK 2 - Years 2021-2026
Part: Wheel

In this video, you will see how to use the tyre repair kit on the Suzuki S-Cross (the system is the same across the range). The bag contains: gloves, a jacket, a warning triangle, a compressor with a pressure gauge, and a cable to plug into the power socket. The small hose goes into the wheel to inflate the tyre. The recommended tyre pressure is indicated on the driver's door sill. If the tyre is punctured, unscrew the orange valve and apply the puncture repair product, following the same procedure described earlier. In this case, a mixture of air and sealant is injected into the tyre, providing an emergency repair and allowing you to reach the nearest tyre fitter.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on the Suzuki S Cross 2
Where to Find the OBD2 Port on the Suzuki S Cross 2
Suzuki S Cross (2021-2026 / MK 2) .. of you who own a second-generation Suzuki S Cross, we will help you easily find the OBD2 port, which allows you to connect a diagnostic tool directly.. …
How to replace the gear knob of the 2017 Suzuki S Cross
How to replace the gear knob of the 2017 Suzuki S Cross
Suzuki S Cross (2013-2019 / MK 1) .. Replacing the gear knob in your Suzuki S Cross first series (year 2017) is really simple and if you want to carry out the operation, just follow.. …
How to reset the service light on the Suzuki S-Cross?
How to reset the service light on the Suzuki S-Cross?
Suzuki S Cross (2021-2026 / MK 2) .. how to reset the service light on the Suzuki S-Cross, a very simple and quick operation to be performed only after completing all scheduled maintenance.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos