Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel on the Suzuki Burgman 650

Model: Suzuki Suzuki Various
Part: Wheel

Video tutorial

In this video tutorial, you will see how to remove the rear wheel on the Suzuki Burgman 650. The first step is to place spacers under the centre stand. Next, remove the mudguard and the number plate holder.

Take a flat-head screwdriver and remove the snap screws located at the rear of the scooter near the number plate; to do this, press in the centre, then lever them out. Do the same on the opposite side of the scooter; at this point, pull to remove the cover above the number plate.

Once all covers are removed, you will have a much clearer workspace, allowing for easier access.

The next step is to remove the transmission cover; to do this, remove the 4 screws using an 8 mm socket. Using a 12 mm socket, also remove the ABS sensor.

Now, remove the brake caliper and braking system by unscrewing the bolts with 12 mm heads. At this point, you can remove the wheel.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Life on a Suzuki Burgman 650
How to Reset the Oil Life on a Suzuki Burgman 650
Suzuki Suzuki Various In this video tutorial, you will see how to reset the oil life on the Suzuki Burgman 650 scooter. The first step is to perform maintenance on the sco…
How to Replace the Air Filter on a Suzuki Burgman 650
How to Replace the Air Filter on a Suzuki Burgman 650
Suzuki Suzuki Various In this video, you will see how to replace the air filter on a Suzuki Burgman 650. First, position the scooter on a flat, sturdy work surface with th…
How to Reset the Service Light on a Suzuki Burgman 650
How to Reset the Service Light on a Suzuki Burgman 650
Suzuki Suzuki Various Whenever you change the engine oil and filter on this scooter model, you must reset the service light that has illuminated on the dashboard. The desc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos