Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Life on a Suzuki Burgman 650

Model: Suzuki Suzuki Various
Part: Onboard computer

In this video tutorial, you will see how to reset the oil life on the Suzuki Burgman 650 scooter. The first step is to perform maintenance on the scooter, such as changing the engine oil. After completing the DIY maintenance, to reset the oil life, use the buttons located below the speedometer on the dashboard; press the left side button and simultaneously turn the key to the ON position, continue holding the side button until the message on the display flashes, then keep holding it until it stops flashing. Turn off the ignition and start the engine to verify the oil change has been reset correctly.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Suzuki Burgman 650
How to Replace the Air Filter on a Suzuki Burgman 650
Suzuki Suzuki Various In this video, you will see how to replace the air filter on a Suzuki Burgman 650. First, position the scooter on a flat, sturdy work surface with th…
How to Reset the Service Light on a Suzuki Burgman 650
How to Reset the Service Light on a Suzuki Burgman 650
Suzuki Suzuki Various Whenever you change the engine oil and filter on this scooter model, you must reset the service light that has illuminated on the dashboard. The desc…
How to Remove the Rear Wheel on the Suzuki Burgman 650
How to Remove the Rear Wheel on the Suzuki Burgman 650
Suzuki Suzuki Various In this video tutorial, you will see how to remove the rear wheel on the Suzuki Burgman 650. The first step is to place spacers under the centre stan…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos