Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service Light on the Suzuki Burgman 400

Model: Suzuki Suzuki Various
Part: Warning light – error code

Video tutorial

After changing the engine oil and its filter on this scooter, you need to reset the service light that has illuminated on the dashboard. To do this, follow the instructions below and refer to the video as well.

First, turn on the ignition and locate the two buttons on the right side under the rev counter. Press the button on the far right and hold it for at least 2 seconds until the oil change interval starts to flash, then press the left button to adjust the next oil change interval.

Next, press both buttons simultaneously for 2 seconds, and the new replacement interval will be updated.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Suzuki Burgman 400
How to Reset the Service Light on the Suzuki Burgman 400
Suzuki Suzuki Various After changing the engine oil and filter on this scooter model, you need to reset the service light that has illuminated on the dashboard. The instru…
How to Reset the Service Light on a Suzuki Burgman 650
How to Reset the Service Light on a Suzuki Burgman 650
Suzuki Suzuki Various Whenever you change the engine oil and filter on this scooter model, you must reset the service light that has illuminated on the dashboard. The desc…
How to Reset the Oil Life on a Suzuki Burgman 650
How to Reset the Oil Life on a Suzuki Burgman 650
Suzuki Suzuki Various In this video tutorial, you will see how to reset the oil life on the Suzuki Burgman 650 scooter. The first step is to perform maintenance on the sco…

Other guides you may be interested in

    Frequently Asked Questions

    • Suzuki Vari - What does the oil warning light on Suzuki mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos