Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the wheel of a Suzuki Jimny?

Model: Suzuki Jimny Jb64w, Jb74w - Years 2018-2026
Part: Wheel

To remove the wheel of a Suzuki Jimny, start by making sure the vehicle is parked on a flat and secure surface. Before proceeding, make sure you have all the necessary tools on hand, including a cross wrench or a ratchet wrench, a socket wrench or a lever to release the wheel bolts. Begin by slightly loosening the wheel bolts, but do not remove them completely. Then, place a jack under the vehicle's frame, near the wheel you want to remove, and lift the vehicle until the wheel is off the ground. Make sure the jack is securely positioned and the vehicle is stable before proceeding. Once the vehicle is lifted, completely remove the wheel bolts and set them aside in a safe place. Then, firmly grasp the wheel and pull it towards you to remove it from the hub. If the wheel is stuck, you may need to use a rubber mallet or a piece of wood to lightly tap the tire and release it from the hub. Once the wheel has been removed, place it in a safe place and proceed with the necessary maintenance or replacement operations.

Posted on 20 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In this video, find the main instructions to remove and replace the wheel with the spare on the Suzuki Jimny. First, remove the spare wheel from the …
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Remove the worn brake disc on a Suzuki Jimny. Lift the car on a jack to the desired height, then remove the wheel (using a socket wrench) along with …
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos