Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Lift the bonnet and place the support rod. Disconnect the connector for the relevant bulb (in the video, this is the dipped beam). Remove the round cover from the back of the bulb and open the metal clip, similar to a paperclip.

Extract the bulb and insert the new one, ensuring it is properly seated. Refit the metal clip to hold the bulb in place, then replace the rear circular cover and finally reconnect the connector.

The procedure is similar for all bulbs. As you can see, this is a task within everyone's reach.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
How to Change the Engine Oil of a Suzuki Swift
How to Change the Engine Oil of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before you begin, lift the front of your Suzuki Swift to access the oil drain plug. Start by loosening and removing this plug. Once done, wait for al…
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Today's information will allow us to disassemble and replace the rear taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the …

Other guides you may be interested in

    Frequently Asked Questions

    • Swift 2010-2017 - How to replace a Suzuki Swift headlight bulb? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos