Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Rear Headlight Bulb on the Suzuki Lapin

Model: Suzuki Lapin He22s - Years 2008-2015
Part: Tail light bulb

To replace a rear headlight bulb on your vehicle, follow these steps: open the trunk, and using a socket wrench, remove the retaining bolt for the affected headlight located on the body profile near the light assembly. Pull the light assembly towards you and locate the bulb to be changed, then remove the bulb holder and turn the bulb a quarter turn to release it. Next, take the new bulb and position it in the bulb holder before reinserting it into the light assembly. Finally, reposition the headlight and reinstall the retaining bolt for the light assembly.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Suzuki Lapin?
How to Replace the Front Headlight Bulb on a Suzuki Lapin?
Suzuki Lapin (2008-2015 / He22s) To replace the front headlight bulb on a Suzuki Lapin, open the hood to access the back of the headlight corresponding to the bulb that needs replace…
Replace Engine Oil and Oil Filter on Suzuki Lapin
Replace Engine Oil and Oil Filter on Suzuki Lapin
Suzuki Lapin (2002-2008 / He21s) Here are the instructions for performing routine maintenance by replacing the engine oil and oil filter on the Suzuki Lapin. First, lift the vehicle …
How to Replace the Remote Battery on a Suzuki Lapin?
How to Replace the Remote Battery on a Suzuki Lapin?
Suzuki Lapin (2015-2024 / He33s) Replacing the remote battery on a Suzuki Lapin is a very simple and inexpensive task. You will need a small flathead screwdriver and a replacement CR…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos