Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
This video is currently unavailable

This guide briefly describes the process of removing and replacing the front headlamp bulb of the Suzuki Swift in simple steps. First, open the bonnet of your car and start by removing the plastic protective cap of the bulbs; then disconnect the electrical connector of the bulb and unclip the metal spring to remove it, as shown in the video.

At this point, install the new dipped and main beam bulb, which has the same fitting (in this case, type H4); install and connect the bulb to the headlamp unit!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb in a Suzuki Swift
How to Replace the Front Headlight Bulb in a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) The steps to replace the front headlight bulb in a Suzuki Swift model 2 are: - open the front bonnet of the vehicle; - remove the cover cap; - discon…
How to replace the headlight bulb on a Suzuki Swift?
How to replace the headlight bulb on a Suzuki Swift?
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) The procedure for replacing the headlight bulb on a Suzuki Swift involves opening the bonnet to access the internal part of the light unit: here, det…
How do you replace the headlight bulb of the Suzuki Swift?
How do you replace the headlight bulb of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the headlight bulb of the Suzuki Swift, you need to open the hood so that you can locate the screws that secure the headlight assembly fro…

    Frequently Asked Questions

    • Swift 2010-2017 - How to replace a Suzuki Swift headlight bulb? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos