Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Headlight bulb

The steps to replace the front headlight bulb of the Suzuki Swift model 2 are: -open the front hood of the vehicle; -remove the light cover; -disconnect the bulb connector; -remove the bulb from the headlight; -insert the new bulb; -connect the bulb connector; -insert the light cover; -close the front hood; All that's left is to test the bulb by turning on the vehicle's lights. If necessary, replace the left front headlight bulb by following the same steps described above.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb on a Suzuki Swift?
How do you replace the headlight bulb on a Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) It will be possible to replace the headlight bulb of the Suzuki Swift by opening the hood to gain access to the components inside the engine compartm…
How do you replace the headlight bulb of the Suzuki Swift?
How do you replace the headlight bulb of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the headlight bulb of the Suzuki Swift, you need to open the hood so that you can locate the screws that secure the headlight assembly fro…
How to Replace the Front Headlight Bulb on the Suzuki Swift?
How to Replace the Front Headlight Bulb on the Suzuki Swift?
Suzuki Swift (1994-2004 / MK 3) You can replace the front headlight bulb on the Suzuki Swift by opening the bonnet to access the components in the engine bay. Here, you will locate …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos