Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Rv 250

Sym Rv 250 - Videoguide

Sym Rv 250
How do you replace the headlight bulb of the Sym RV 250?
In order to replace the headlight bulb of the Sym RV 250, you need to loosen the screws that secure the front fairing of the motorcycle to its housing. Once …read all…
Posted on 22 April 2024 by ScegliAuto
Sym Rv 250
Replace the Sym RV 250 headlight bulb
In this video tutorial we will see the main steps that will allow us to disassemble and replace the front light and its bulb of the Sym RV 250 scooter. First …read all…
Posted on 22 April 2024 by ScegliAuto
Headlight bulb (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos