Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : How to change the gear knob and gear shift of an Opel car

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Gear Shift Knob
Operation: How to change the gear knob and gear shift of an Opel car

In this video we see how to change the gear knob and gear lever gaiter on an Opel car: we start by removing the panel under the handbrake, then we lever off the gear lever gaiter that we need to remove, then we remove everything with a lot of force, trying to avoid removing the entire lever, as the youtuber did! This complicates things because he has to be careful not to turn the lever, which must be reassembled in the same way it was removed. We will reassemble the gaiter on the appropriate slider, insert the metal frame in its place and put back on top of the lever, its knob. The gaiter and knob can be found on his advice on Amazon with the code B08ZN7Z3R9 at a price of 27.14 euros, free delivery for Prime customers.


Posted on 4 March 2024 by ScegliAuto



How to change the gear knob on an Audi.
(Various brands) Various Let's see how to change the gear knob on an Audi car: let's see how to change only the knob without changing the gear boot, though, because usually t
How to replace the gear shift lever knob?
(Various brands) Various The car's gear shift knob can be purchased at any auto parts store (it can also be found on Amazon). The knob is usually screwed clockwise to the gea
How do you remove the gear knob on Dacia cars?
(Various brands) Various Let's start replacing the gear knob by lifting the plastic frame that surrounds the lever. Let's use a plastic object to release the clips, avoiding

    Frequently Asked Questions

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos