Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Geely
    3. : Borui : How to replace transmission oil on Geely Borui

Geely Borui - Video tutorial

Model: Geely Borui MK 1 - Years 2015-2022
Part: Gear oil
Operation: How to replace transmission oil on Geely Borui

If we intend to replace the transmission oil in do-it-yourself mode on this car, we can proceed as follows: the first thing to do is lift the car and open the bonnet. Locate the transmission oil drain plug and unscrew it after placing a container for collecting the used oil on the floor. Wait a few minutes for the oil to completely flow out, then screw it back in. To top up the new oil, remove the plastic panel inside the right rear wheel mudguard and find the filler cap behind it. Unscrew the cap and use a funnel with the hose to fill the circuit again with an oil that has the specifications suitable for the type of transmission.


Posted on 14 April 2023 by ScegliAuto



How to replace transmission oil on Geely Borui
Geely Borui (2015-2022 / MK 1) If we intend to replace the transmission oil in do-it-yourself mode on this car, we can proceed as follows: the first thing to do is lift the car and
How do you change the gearbox oil on a Geely Emgrand S?
Geely Emgrand S (2016-2023 / MK 1) In order to replace the gearbox oil of the Geely Emgrand S, it is necessary to loosen the drain plug of the tank which is located in the lower part o
How do you change the engine oil of the Geely Emgrand S?
Geely Emgrand S (2016-2023 / MK 1) To be able to change the engine oil of the Geely Emgrand S you need to access the components in the lower part of the engine compartment: here you ca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos