Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Replacing the headlight bulbs on Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass MK 49, MK 1 - Years 2006-2016
Part: Headlight bulb
Operation: Replacing the headlight bulbs on Jeep Compass

Replacing Damaged Headlight Bulbs on a Jeep Compass? Let's see how they replace each other. We open the front hood, pulling the lever located at the bottom right of the dashboard, let's put it in safety with the rod. We access the engine compartment and precisely behind the headlights. We remove the lamp holders with metal hooks and damaged bulbs. We fit the new bulbs. We mount the new bulbs with their parts in the headlight. We test the correct functioning of the lights. We close the front hood of the Jeep Compass after making sure that it works correctly.


Posted on 7 December 2023 by ScegliAuto



Replacing the headlight bulbs of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Burnt out headlight bulbs? Let's see how to replace the Jeep Compass headlight bulbs. We unscrew the plastic coating in the lower part of the bumper
Replacing the rear bulbs on Jeep Compass
Jeep Compass (2016-2024 / 552, MK 2) To replace the headlight bulbs on Jeep Compass but also on other Jeep models, start by lifting the trunk lid. Now, using a flat head screwdriver, unc
How to replace headlight bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Let's see how to replace the headlight bulbs on Jeep Compass: open the front hood by pulling the lever at the bottom right of the dashboard, let's se

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos