Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Picanto
  6. : Spark plugs

Kia Picanto - Spark plugs

Kia Picanto (2004-2011 / MK 1, 2A)
How to replace the spark plugs of the Kia Picanto

Below we will see the instructions that will allow us to disassemble and replace the spark plugs of the Kia Picanto, following these simple steps. First, we …read all…
Posted on 17 October 2023 by ScegliAuto
Kia Picanto (2011-2018 / TA, MK 2)
How to replace spark plugs in KIA Picanto?

In this tutorial we can see how to replace the spark plugs in your KIA Picanto, a very simple and fast operation. First of all, let's make sure that the engine …read all…
Posted on 15 May 2023 by ScegliAuto
Kia Picanto (2004-2011 / MK 1, 2A)
Spark plug replacement instructions

First of all, it is suggested to carry out this maintenance with a cold engine to avoid unpleasant burns; replace one spark plug at a time by disconnecting the …read all…
Posted on 17 August 2023 by ScegliAuto

Airbags (1) Loudspeaker (1) Antenna (1) Car stereo (6) Battery (3) Spark plugs (3) Key (7) Timing belt (4) -board computer (4) Checks and maintenance (21) Dashboard (2) Gearshift gaiter (1) Headlight (2) Tail light (2) Fog lights (1) Air filter (5) Cabin air filter (3) Oil filter (2) Hand brake (2) Clutch (3) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Gear oil (1) Engine oil (4) Door panel (5) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (6) Radiator (2) Fuse box (7) Lock (1) Outside rearview mirror (3) Thermostat (2)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos