Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Light bulb

Kia Picanto - Light bulb

Kia Picanto (2004-2011 / MK 1, 2A)
How to replace the headlight bulb on the Kia Picanto?
In order to replace the headlight bulb of the Kia Picanto, you need to open the hood to access the engine compartment and remove the circular plastic cover …read all…
Posted on 16 March 2024 by ScegliAuto
Kia Picanto (2011-2018 / TA, MK 2)
How to replace the front position light bulb on a Kia Picanto
Before starting, we will have to open the front hood of our Kia Picanto. So let's start by unscrewing and removing the bolts that secure the headlight to the …read all…
Posted on 6 February 2024 by ScegliAuto
Kia Picanto (2004-2011 / MK 1, 2A)
Rear light bulb replacement
To replace the rear light bulb it is necessary to remove the light itself: therefore open the rear hood and unscrew the fixing screws of the light which are …read all…
Posted on 14 August 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Antenna (1) Car stereo (6) Battery (3) Spark plugs (3) Key (7) Timing belt (4) -board computer (4) Checks and maintenance (21) Dashboard (2) Gearshift gaiter (1) Headlight (2) Tail light (2) Fog lights (1) Air filter (5) Cabin air filter (3) Oil filter (2) Hand brake (2) Clutch (3) Light bulb (3) Headlight bulb (9) Interior lights ceiling light bulb (1) Third brake light (1) Gear oil (1) Engine oil (4) Door panel (5) Rear bumper (1) Brake pads (1) Fuel pump (1) Instrument cluster (6) Radiator (2) Fuse box (7) Lock (1) Outside rearview mirror (3) Thermostat (2)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos