Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 407
    4. : How to remove the steering wheel of the Peugeot 407

Peugeot 407 - Video tutorial

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Steering wheel
Operation: How to remove the steering wheel of the Peugeot 407

In this video tutorial you can see how it is possible to remove the Peugeot 407 steering wheel. First of all, before proceeding with the disassembly of the steering wheel, you must put the vehicle in safety, then put the handbrake, lift the hood of the car and disconnect the battery proceeding to disconnect first the negative pole and then the positive one. At this point to extract the steering wheel you have to rotate the steering wheel until the rear hole is visible in which you have to insert the flat screwdriver or a fairly long T30 torx, with this you have to press the rear stop. At the same time, you must keep the steering wheel airbag pressed lightly until it comes out of its seat. At this point you have to disconnect the connectors and you are done.


Posted on 10 April 2024 by ScegliAuto



Replace the steering box boot on Peugeot 407 1.6 HDI
Peugeot 407 (2004-2012 / MK 1) Let's see in this video the main steps that will allow us to disassemble and replace the steering box cap on a Peugeot 407 1.6 HDI. First we lift the
How to change the time on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To change the time on a Peugeot 407, start by turning on the car and making sure the display on the dashboard shows the time. Press the "Menu" button
Removing the steering wheel airbag on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Before removing the steering wheel, lift the hood of the car and disconnect the battery: to do this, remove the cover and disconnect the negative pol

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos