Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How do you turn on the fog lights on a Peugeot 208?

Peugeot 208 - Video tutorial

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Fog lights
Operation: How do you turn on the fog lights on a Peugeot 208?

We can see through this very short video guide how to turn on the fog lights on a first-generation Peugeot 208, a model produced from 2012 to 2019. Before being able to turn on the fog lights, it is important to already have the low beam or high beam lights on, but let's now see how to turn on the fog lights. The operation to be performed is very simple, in fact, it will be enough to find the fog light switch on the left lever of the steering wheel. Once found, it will be sufficient to turn the ring forward to turn them on and turn it back to turn them off.


Posted on 14 August 2023 by ScegliAuto



How to turn on the fog lights of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The fog lights (or depth lights) are useful in cases where visibility is poor, or in the event of fog, these headlights are in fact positioned very l
How to replace the front fog lights on a Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) In this video, we see how to replace the front fog lights on the Peugeot 208. In the video, we see the voltage of these lights, which we can easily p
Replacing the fuses on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On Peugeot 208 the main fuse box is located inside the passenger compartment, on the left side of the dashboard. To access it, remove the plastic cov

    Frequently Asked Questions

    • 208 2019-2026 - Why don't the fog lights on my Peugeot 208 work? Read Answer
    • 208 2012-2019 - How are the rear fog lights activated in a Peugeot 208? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos