Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 107
    4. : How do you replace the clutch of the Peugeot 107?

Peugeot 107 - Video tutorial

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Clutch
Operation: How do you replace the clutch of the Peugeot 107?

In order to replace the clutch of the Peugeot 107, it is necessary to lift the car so that the screws fixing the front left wheel of the vehicle can be loosened: once this has been removed, it will be possible to proceed by loosening the screws fixing the gearbox and consequently removing it as well. Now the clutch and its spring will be visible and can be completely removed; after the removal of these parts, it will be possible to insert the new replacement piece, then mounting all the other components that were previously removed.


Posted on 23 April 2024 by ScegliAuto



Adjusting the clutch cable on a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Over the years and especially with the miles traveled, the clutch cable of a car can loosen, resulting in a greater pedal travel. In today's video, w
How to replace the clutch of the Peugeot 107 1.0
Peugeot 107 (2005-2014 / MK 1) Let's briefly look at the instructions that will allow us to disassemble and replace the clutch of the Peugeot 107. First, we lift the car and remove
How to adjust the clutch cable on the Peugeot 107 - Citroen C1 - Toyota Aygo
Peugeot 107 (2005-2014 / MK 1) In this video guide we will see how to correctly adjust the clutch cable on the Peugeot 107, but also on the Citroen C1 and Toyota Aygo twins. First

    Frequently Asked Questions

    • 107 2005-2014 - What to do if the clutch of the Peugeot 107 is not working? Read Answer
    • 107 2005-2014 - Why is the clutch of the Peugeot 107 not working? Read Answer
    • 107 2005-2014 - What causes clutch problems on the Peugeot 107? Read Answer
    • 107 2005-2014 - How much does it cost to replace the clutch of the Peugeot 107? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos