Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. 19
    4. : How to replace the cylinder head gasket on a Renault 19 Energy engine.

Renault 19 - Video tutorial

Model: Renault 19 MK 1 - Years 1988-1997
Part: Engine head
Operation: How to replace the cylinder head gasket on a Renault 19 Energy engine.

Let's start the operation by disconnecting the vehicle's battery and removing the coolant and engine oil. Then we dismantle the belt cover and remove the timing belt. Next, we disconnect all electrical connections such as spark plug wires, throttle cable, starter cable, etc. Then we remove the oil vapor recovery tube and remove the exhaust manifold and valve cover to remove the cylinder head. Once this is done, we remove the old cylinder head gasket, clean the pistons and cylinder head thoroughly, and finally install a new gasket and reassemble everything following the reverse procedure.


Posted on 14 December 2023 by ScegliAuto



Where are the fuses located in the Renault 19?
Renault 19 (1988-1997 / MK 1) On the Renault 19, all fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this car model, it is possible to
How to fix the noise in the car fan
Renault 19 (1988-1997 / MK 1) The guide shows you how to repair an engine in the ventilation of your car. It is an easy to solve problem and can be fixed by doing it yourself. Thi
Corroded body repair with fiberglass
Renault 19 (1988-1997 / MK 1) The use of fiberglass to repair the bodywork should be intended for those elements of the bodywork that are precisely made of this material; when, on

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos