Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Transporter
    4. : Gearbox disassembly instructions

Volkswagen Transporter - Video tutorial

Model: Volkswagen Transporter MK 3, T25, T3 - Years 1979-1990
Part: Transmission
Operation: Gearbox disassembly instructions

The engine of the vehicle in question is positioned at the rear: start by opening the engine compartment and giving a general dusting before starting to disassemble and disconnect the battery; remove the air filter container, the intake manifold, the starter motor, the constant velocity joints of the drive shaft on the gearbox side, the clutch linkage and the gear cables. Remove again the support that connects the gearbox to the frame, the section of exhaust pipe that passes from under the gearbox, free the cable glands that interfere with the disassembly and finally remove the pins that fix the gearbox flange to the engine in order to be able to remove it completely. At this point, proceed with the replacement of the clutch, flywheel and primary shaft bearing present in the kit. Then proceed backwards for reassembly.


Posted on 14 August 2023 by ScegliAuto



How to change gearbox oil on a Volkswagen Transporter T4
Volkswagen Transporter (1990-2003 / T4, MK 4) How to easily change the gearbox oil on a Volkswagen Transporter T4 manual gearbox. First you need to unscrew the bolts of the left rear wheel, that
Volkswagen Transporter gearbox oil replacement
Volkswagen Transporter (2003-2014 / T5, MK 5) In this video tutorial we will deal with replacing the gearbox oil of a Volkswagen Transporter. Then we lift our vehicle and we go to remove the lowe
Clutch and flywheel replacement
Volkswagen Transporter (1979-1990 / MK 3, T25, T3) However, the replacement of the clutch and the flywheel requires good knowledge of general mechanics and some equipment; apply the external O-ring an

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos