Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the bumper of the VW Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK IV, 9N, MK 4, Polo IV - Years 2001-2009
Part: Front bumper
Operation: How to remove the bumper of the VW Polo

The removal of the front bumper of the Volkswagen Polo model 9n is an operation that follows very simple steps to be carried out independently. The steps to be followed are: - open the front hood; - unscrew the four upper screws of the bumper; - unhook the central grille by removing the four clips; - unscrew the screws near the wheel arch; - unscrew the screws on the bottom of the bumper; remove the bumper by unhooking it; once this operation is done, you will have access to the engine head, allowing you to perform the necessary maintenance for the proper functioning of the vehicle.


Posted on 6 May 2024 by ScegliAuto



Removing the rear bumper of the Polo
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) Let's see the disassembly of the rear bumper of the Vw Polo (if damaged or for other maintenance). We open the tailgate, We remove the covers placed
How to remove the front bumper of the Volkswagen Polo
Volkswagen Polo (2017-2024 / MK VI, Polo VI, Polo 6, MK 6, AW1) Let's see in this guide the main instructions on how to remove and replace the front bumper of the Volkswagen Polo. First we open the bonnet of our c
Assembly of the rear bumper of the Volkswagen Polo MK5
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) If the rear bumper of the Volkswagen Polo is broken, following a collision with an obstacle or contact with another vehicle, after removing the damag

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - What is the cost to replace the front bumper on the Polo? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos