Do it yourself
Frequently asked questions about cars and motorcycles
Searched for Adblue Light Still On After Filling Peugeot - The individual is experiencing an issue with the AdBlue light on their Peugeot vehicle remaining on even after filling it up with AdBlue. They have driven over 30 miles since filling it up and have a 1.6 engine.
Page generated automatically based on user searches (*)
Where do you put AdBlue into a Peugeot 2008?
Answer: In the Peugeot 2008, the AdBlue filling nozzle is located under the boot and is visible after removing the spare wheel. It is advisable to top up the ... read all

Posted on 1-03-2023

Read Answer
Why does the AdBlue light stay on after filling the tank in the Peugeot 2008?
Answer: Once the AdBlue tank has been filled, the reserve warning light stays on for a while and does not go off immediately. To see it disappear from the das... read all

Posted on 25-01-2023

Read Answer
What to do if the Adblue warning light stays on after filling the fuel tank on the Peugeot Expert?
Answer: When we see the Adblue warning light on the instrument panel of our vehicle come on, we need to top up the additive. If after topping up the warning l... read all

Posted on 1-08-2022

Read Answer
Does the AdBlue light stay on after filling the tank on the Peugeot 3008?
Answer: In the event that on this car model we find that the Adblue warning light stays on even after topping up the additive above the minimum level, we must... read all

Posted on 14-02-2023

Read Answer
What to do when the AdBlue warning light stays on after filling the tank on the Peugeot 5008?
Answer: If the AdBlue warning light remains on even after topping up above the minimum level, there are probably problems with the tank and in particular with... read all

Posted on 3-06-2022

Read Answer
How to change the engine oil and gearbox oil of the Peugeot Kisbee
Kisbee .. the engine oil and transmission oil of the Peugeot Kisbee scooter. First we put the central stand to our scooter and start by unscrewing the oil.. .. At this point we are going to unscrew the filling hole and pour in the new engine oil, filling up to level; then replace the gearbox oil, unscrewing..
How to change gearbox oil on Peugeot Kisbee 4T 2020
Kisbee .. guide how to replace the transmission oil of the Peugeot Kisbee 50 4-stroke, from 2020. First we put our scooter on the central stand and start by unscrewing.. .. vent plug, with a 12 mm wrench, and remove the filling one; let's go and pour the new gear oil (about 120 ml of it enter, having the 80w90 gradation)...
How to replace the oil in the Peugeot Speedfight 125 scooter?
Speedfight 4 .. we can see how to replace the engine oil in the Peugeot Speedfight 125 scooter, a very simple and quick operation. Before proceeding, make sure the engine.. .. we can pour new 5W-40 oil through the upper filling hole...
How to replace the engine oil in the Peugeot Metropolis 400 scooter?
Metropolis 400 .. we can see how to replace the engine oil in the Peugeot Metropolis 400 scooter, an extremely simple and fast operation to be carried out every 12 months... .. to be cool enough, then we open the cap of the filling hole, locate the drainage hole bolt, and unscrew it using the appropriate square key. Then, we..
How to change the engine oil on Peugeot Kisbee 50cc 4T (2020)
Kisbee .. service of the engine oil change on a Peugeot Kisbee 50cc 4-stroke scooter, from 2020. First we place our scooter on the central stand and.. .. with 20 NM of force. We just have to open the filling hole, removing the dipstick, and pour in the new engine oil until it reaches the level indicated..
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

AdBlue Light Stays On Even After Filling Up: Possible Solutions and Next Steps: The individual is experiencing an issue with the AdBlue light on their Peugeot vehicle remaining on even after filling it up with AdBlue. They have driven over 30 miles since filling it up and have a 1.6 engine. They have tried resetting the warning light, but it has not turned off. They may need to take their vehicle to a professional for further assistance. The issue may be easily solved, as the AdBlue tank may just need to be filled completely. If the tank is not filled after a certain distance, the vehicle may not be able to restart.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.