|
Do it yourself
| |||
| ||||
Model: Peugeot Kisbee
This guide explains how to replace the transmission oil of the Peugeot Kisbee 50 4-stroke, 2020 model. First, place your scooter on the centre stand and start by removing the oil drain bolt located at the bottom of the left transmission casing; allow it to drain into a container for a couple of minutes. Next, refit the drain plug using a 12 mm spanner, and remove the filler cap; pour in the new gear oil (approximately 120 ml, with a rating of 80w90).
Updated on 30 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Kisbee
To change the engine oil of the Peugeot Kisbee, loosen the drain plug located at the central lower part of the scooter. Once the plug is loosened, co…
Kisbee
In order to replace the gearbox oil of the Peugeot Kisbee, you must loosen the drain plug of the transmission housing: this plug will be located on t…
Kisbee
Replacing the motor oil in the Peugeot Kisbee scooter, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make…
|
How to Change the Engine Oil in an Aprilia RS 660?
In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure that the engine is completely cold, then remove the screws securing the lower fairing and take it off. Next, place a container underneath the bike, unscrew the drain bolt with an 8 mm hex key, and let all the oil in the system drain out. At this point, you can replace the filter, reassemble everything, and add new oil through the designated fill hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |