Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Peugeot Kisbee?

Model: Peugeot Kisbee
Part: Engine oil

Video tutorial

To change the engine oil of the Peugeot Kisbee, loosen the drain plug located at the central lower part of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container.

When the oil has completely drained, remove the oil filter located in the same position and replace it with a new one. Finally, top up by adding engine oil through the breather on the right side of the vehicle.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Gearbox Oil of the Peugeot Kisbee
How to Replace the Engine Oil and Gearbox Oil of the Peugeot Kisbee
Kisbee In this brief and simple guide, learn how to remove and replace the engine oil and gearbox oil of the Peugeot Kisbee scooter. First, place the scoote…
How to Change the Engine Oil on Peugeot Kisbee 50cc 4T (2020)
How to Change the Engine Oil on Peugeot Kisbee 50cc 4T (2020)
Kisbee Let’s see how to perform the routine maintenance oil change on a 2020 Peugeot Kisbee 50cc 4-stroke scooter. First, position your scooter on the centr…
How to change the engine oil of the Peugeot Kisbee?
How to change the engine oil of the Peugeot Kisbee?
Kisbee To change the engine oil of the Peugeot Kisbee, unscrew the drain plug of the oil reservoir, located at the bottom of the scooter, near the exhaust. …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos