Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gearbox oil of the Peugeot Kisbee?

Model: Peugeot Kisbee
Part: Transmission fluid

Video tutorial

In order to replace the gearbox oil of the Peugeot Kisbee, you must loosen the drain plug of the transmission housing: this plug will be located on the lower rear part of the housing and you can ensure that all the old oil is expelled. At this point, you can proceed by topping up with the necessary amount of oil: to do this, you will need to use a plunger to push the oil through the same drain hole.

Once the top-up is complete, you can close the plug and check that everything is functioning properly.


Posted on 1 October 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Oil of the Peugeot Kisbee 4T 2020
How to Replace the Gear Oil of the Peugeot Kisbee 4T 2020
Kisbee This guide explains how to replace the transmission oil of the Peugeot Kisbee 50 4-stroke, 2020 model. First, place your scooter on the centre stand …
How to Replace the Engine Oil and Gearbox Oil of the Peugeot Kisbee
How to Replace the Engine Oil and Gearbox Oil of the Peugeot Kisbee
Kisbee In this brief and simple guide, learn how to remove and replace the engine oil and gearbox oil of the Peugeot Kisbee scooter. First, place the scoote…
How to Replace the Transmission on a Peugeot Kisbee?
How to Replace the Transmission on a Peugeot Kisbee?
Kisbee To replace the transmission on a Peugeot Kisbee, loosen all the bolts securing the transmission cover located near the rear wheel on the left side of…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos