Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Automatic Braking System Fault Peugeot - The Automatic Braking System Fault in Peugeot vehicles, such as the 208 and 3008, is often caused by an oversensitivity of the sensor. Even a small amount of dirt or snow can trigger the alarm.
Page generated automatically based on user searches (*)
What causes the automatic braking fault on the Peugeot 3008?
Answer: On this model, the "Automatic braking system fault" warning and then the orange warning light may come on. In some cases the warning light may even re... read all

Posted on 6-12-2022

Read Answer
What is the warning light that indicates a fault in the braking system in the Peugeot 3008?
Answer: In the Peugeot 3008, the braking system failure is signaled both by an explicit message on the display, bearing the words "braking system failure", an... read all

Posted on 12-12-2022

Read Answer
What is the meaning of the yellow warning lights on the Peugeot 2008?
Answer: The yellow warning lights in the vehicle's instrument panel indicate a warning. The main ones are: ABS anti-lock braking system fault, flat tire senso... read all

Posted on 10-11-2022

Read Answer
What does the handbrake malfunction light mean on a Peuget 3008?
Answer: If you see the handbrake warning light come on on the instrument panel display of your Peugeot 3008 car even after it has been released, then this mea... read all

Posted on 1-01-2023

Read Answer
Why does the engine fault service warning light come on in the Peugeot 308?
Answer: The Peugeot 308 engine fault warning light may come on for reasons related to a possible failure in the fuel injection system, exhaust system or ignit... read all

Posted on 14-01-2022

Read Answer
Disassembly and replacement of the front brake pads of the Peugeot Kisbee.
Kisbee .. and replace the front brake pads of the Peugeot Kisbee scooter. First of all, we put the scooter on the center stand and start unscrewing the.. .. from the residual dirt and reassemble the braking system...
How do you replace the brake oil of the Peugeot Citystar 125?
Citystar 125 .. In order to replace the brake oil of the Peugeot Citystar 125, you need to connect the hose to the corresponding brake caliper: then it will be.. .. exhausted brake oil is expelled from the brake system. Once the oil inside the system is finished, you can disconnect the hose and close the brake caliper..
How to change the engine oil in the Peugeot Tweet 125 scooter?
Tweet 125 .. this tutorial, changing the engine oil in your Peugeot Tweet 125 scooter is a very simple and fast operation. First of all, wait for the engine to be.. .. a 17mm wrench. Let all the oil contained in the system flow out, clean the filter from any residual dirt and reinsert the bolt. At this point we can..
How to replace the engine oil in the Peugeot Kisbee scooter?
Kisbee .. we can see how to replace the engine oil in the Peugeot Kisbee scooter, an extremely simple and quick operation that should be done every 12 months... .. to open the fill hole plug, let the oil in the system drain out, and reassemble everything. At this point, all that's left is to pour the new oil through..
How to replace the engine oil in the Peugeot Metropolis 400 scooter?
Metropolis 400 .. we can see how to replace the engine oil in the Peugeot Metropolis 400 scooter, an extremely simple and fast operation to be carried out every 12 months... .. key. Then, we let the oil contained in the system come out, unscrew the old filter, and tighten the replacement. At this point, we can put everything..
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

Video tutorial > Peugeot
Common Causes and Solutions for Automatic Braking System Fault in Peugeot Vehicles: The Automatic Braking System Fault in Peugeot vehicles, such as the 208 and 3008, is often caused by an oversensitivity of the sensor. Even a small amount of dirt or snow can trigger the alarm. To solve the issue, it is recommended to clean the main belt with soapy water, check for any damage, and remove any grease and dirt from the spindles. In some cases, the seat weight sensor can also cause the system to malfunction if it is too sensitive. Additionally, a blown fuse or bad relay can result in the ABS system not functioning properly.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.