Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Peugeot Tweet 125 Scooter?

Model: Peugeot Tweet 125
Part: Engine oil

Video tutorial

As shown in this tutorial, changing the engine oil on a Peugeot Tweet 125 scooter is a very simple and quick operation. First, wait until the engine is completely cold.

Then, place a container underneath and unscrew the bolt indicated with a 17mm socket. Allow all the oil in the system to drain out, clean the filter of any dirt residue, and reinsert the bolt.

At this point, you can add new oil through the upper hole until the ideal level is reached, which can be checked using the dipstick.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Peugeot Tweet 125 scooter?
How to replace the engine oil in the Peugeot Tweet 125 scooter?
Tweet 125 In this tutorial we can see how to replace the engine oil in the Peugeot Tweet 125 scooter, an extremely simple and fast operation. First of all, we …
How to replace the battery of the Peugeot Tweet 125
How to replace the battery of the Peugeot Tweet 125
Tweet 125 Today's instructions will show us how to disassemble and replace the battery of the Peugeot Tweet 125 scooter, as well as the Tweet 50. First, we put…
How to Replace the Fork Oil on the Peugeot Tweet 125
How to Replace the Fork Oil on the Peugeot Tweet 125
Tweet 125 This guide shows you how to disassemble the front fork and replace the oil on the Peugeot Tweet 125 scooter. First, place the scooter on its centre s…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos