Do it yourself
Frequently asked questions about cars and motorcycles
Searched for Nissan Micra K13 Dashboard Removal - The Nissan Micra K13 dashboard removal process involves inserting a flat screwdriver into a slot and applying light pressure to detach it. The first step is to start at the top of the A pillar and pull out towards the inside of the car.
Page generated automatically based on user searches (*)
How to replace the pollen filter of the Nissan Micra K13 version?
Nissan Micra (2010-2017 / K13) .. we see how to replace the pollen filter of the Nissan Micra version k13: we will access the filter from the passenger footwell, in an extremely simple.. .. is nothing to dismantle, just to go under the dashboard and remove the cover of the container where the cabin filter is kept. We pull it towards us..
How to replace the rear wiper on Nissan Micra K13
Nissan Micra (2010-2017 / K13) .. short video how to change the rear wiper on a Nissan Micra K13, third series, in simple and quick steps. First we go to raise our rod or the arm of..
How to remove the dashboard of a Nissan Micra
Nissan Micra (2010-2017 / K13) .. on the driver's seat. On the upper side of the dashboard, above the air vents, we will notice a small crack. Let's insert the tip of a flat screwdriver.. .. the so much to be able to proceed with the removal with the hands. After this step the dashboard will have detached, but before removing it completely.. .. the disassembly of the dashboard of our Nissan Micra...
How to open the hood on Nissan Micra
Nissan Micra (2010-2017 / K13) .. not everyone knows: opening the hood on Nissan Micra (here it is the k13 model, sold from 2010 to 2017). As on almost all car models, the first.. .. model, it is located in the lower part of the dashboard, under the side air vent. Once this lever is pulled, position yourself in front of the hood,..
How to reset the service indicator on the Nissan Micra K13.
Nissan Micra (2010-2017 / K13) .. shown how to reset the maintenance light on the Nissan Micra K13. It is recommended to perform this procedure only after having the vehicle serviced... .. press the menu button located on the side of the dashboard until the service menu is displayed. Then press the button with the dot until the maintenance..
Does the Nissan Micra K13 have any problems?
Answer: On the Nissan Micra K13, problems have been found with the functioning of the throttle valve, resulting in unexpected acceleration of the vehicle when... read all

Posted on 21-06-2023

Read Answer
What does the maintenance light on the Nissan Micra K13 indicate?
Answer: If when you start the instrument panel of your Nissan Micra K13 (year 2010-2017) the maintenance light stays on steadily, it means that you need to ha... read all

Posted on 5-02-2023

Read Answer
How to replace the cabin filter on Nissan Micra K13?
Answer: To replace the cabin air filter (or pollen filter) of the Nissan Micra K13 we must first remove the mat and carpet from the driver's side and then rem... read all

Posted on 18-05-2022

Read Answer
Why is the red engine light on in the Nissan Micra?
Answer: If the red engine light remains on constantly when you start the instrument panel of your Nissan Micra K13 (year 2010-2017), it means that there is a ... read all

Posted on 24-05-2023

Read Answer
How much does it cost to replace the clutch of the Nissan Micra K12?
Answer: The cost of the clutch kit for the Nissan Micra K12 (which includes the disc, the pressure plate and the release bearing) is about 70.00 euros to whic... read all

Posted on 14-01-2018

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

Nissan Micra K13 Dashboard Removal Process: The Nissan Micra K13 dashboard removal process involves inserting a flat screwdriver into a slot and applying light pressure to detach it. The first step is to start at the top of the A pillar and pull out towards the inside of the car. Then, a remover tool is inserted between the cluster lid C and instrument panel assembly to disengage metal clips on the lower side. The gear knob should be brought vertically to avoid problems with removing the plastics. Finally, a bezel removal tool is used to release the bezel from the dashboard.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.