Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Nissan Micra K13

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this video, see how to replace the pollen filter on a Nissan Micra K13: access the filter from the passenger footwell, which is extremely simple. There is nothing to disassemble, just go under the dashboard and remove the cover of the container where the cabin filter is housed.

Pull it towards you to remove it and clean the area of dust and debris with a blast of compressed air, or by inserting a stick with a microfiber cloth to clean it well. Now, replace the old filter with the new one, paying attention to the installation direction, and then close its cover.

The operation is complete.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Replacing the Pollen Filter on Nissan Micra
Replacing the Pollen Filter on Nissan Micra
Nissan Micra (2010-2017 / K13) In this video tutorial, you will learn how to remove and replace the pollen filter on a second-generation Nissan Micra. The pollen filter is located …
Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How do you replace the spark plugs in the Nissan Micra K13?
How do you replace the spark plugs in the Nissan Micra K13?
Nissan Micra (2010-2017 / K13) The candles of a car, in general and not just the specific vehicle, must be replaced in the long run as they inevitably oxidize or even burn out, so …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos