Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Fan Resistor on Alfa Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Blower motor

Video tutorial

Remove the fan resistor from a Giulietta? Here’s how to take it out from inside the vehicle. Use a lever to remove the plastics under the dashboard and at the side of the centre tunnel.

Unscrew the cover (where the air filter and fan are located) with a screwdriver. Access the resistor and disconnect the large connector, then extract it from the cabin.

Insert a new fan resistor (connect the power connector). Refit the cover and tighten the screws.

Check the correct installation of the previously mounted parts. Turn on the fan and perform a functionality test.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on an Alfa Romeo Giulietta?
How to Replace the Timing Belt on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the timing belt on an Alfa Romeo Giulietta, first open the bonnet and remove the plastic covers on the left side of the engine block. Once…
Replacing the Rear Brake Discs of the Alfa Romeo Giulietta
Replacing the Rear Brake Discs of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide shows how to remove and replace the rear brake discs and pads of the Alfa Romeo Giulietta in simple steps. First, lift the vehicle and rem…
How to Replace the Fuel Filter on an Alfa Romeo Giulietta?
How to Replace the Fuel Filter on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the fuel filter on an Alfa Romeo Giulietta, open the bonnet to access the engine bay: the filter is located just in front of the tank cont…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos