Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part:

Video tutorial

To remove the third brake light on an Alfa Romeo Giulietta, open the tailgate and locate the internal trim at the top, near the third brake light. Remove the internal panel of the tailgate by unclipping the pressure clips with a plastic lever, taking care not to break them.

Once the trim is removed, locate the third brake light assembly secured with screws or nuts. Disconnect the electrical connector attached to the light.

Unscrew the securing screws or nuts and gently push the light assembly outwards from the tailgate. At this point, you can completely remove the third brake light.

For reassembly, insert the assembly back into its place, screw in the screws, reconnect the electrical connector, and remount the internal panel by pressing until the clips are fully engaged.


Posted on 9 April 2026 by ScegliAuto


Related tutorials

Replacing the Third Brake Light on Alfa Romeo Giulietta
Replacing the Third Brake Light on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short video tutorial, you will see all the steps needed to replace the third brake light on an Alfa Romeo Giulietta. First, open the boot of …
How to Replace the Third Brake Light on Alfa Romeo Giulietta
How to Replace the Third Brake Light on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Replacing the third brake light on the Alfa Romeo Giulietta can be easily done yourself: since the third brake light is integrated into the spoiler, …
Replacement of the lower door light bulb of the Alfa Romeo Giulietta.
Replacement of the lower door light bulb of the Alfa Romeo Giulietta.
Alfa Romeo Giulietta (2010-2020 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the lower bulb of the door (or welcome light) of the Alfa Romeo Giul…

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos