Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to replace third stop on Alfa romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Third brake light
Operation: How to replace third stop on Alfa romeo Giulietta

The replacement of the third stop on the Alfa Romeo Giulietta can easily be done by yourself: since the third stop is integrated in the spoiler, it is therefore necessary to remove the spoiler itself; you will start by opening the tailgate and then unhook the plastic band applied just below the spoiler seat (it is fixed by interlocking so just pull to extract the pressure locks); then remove the rubber caps to access the spoiler fixing nuts and then unscrew the four nuts and remove the spoiler; finally, just unscrew the fixing screws of the third stop to replace it with the new one, proceeding backwards.


Posted on 19 December 2023 by ScegliAuto



How to reset the Alfa Romeo Giulietta Start & Stop system?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to reset the Start & Stop system of the Alfa Romeo Giulietta, it is necessary to disconnect the cables connected to the battery, and eventua
Replacement of the third stop on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short video tutorial we can see all the steps to take to replace the third brake light on an Alfa Romeo Giulietta. First we need to open the
How to replace the Alfa Romeo Giulietta air filter
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike what happens in many other car models, the Alfa Romeo Giulietta air filter is not located in the upper area of the engine compartment but in t

    Frequently Asked Questions

    • Giulietta 2010-2020 - Why is the third brake light of the Alfa Romeo Giulietta not working? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos