Do it yourself
Frequently asked questions about cars and motorcycles
This guide will show you the steps to remove and replace the engine spark plugs and air filter of the Aprilia RSV 1000 motorcycle. First, place the bike on a stand and start by removing the seat; then, unscrew the fuel tank mounting screws to lift and remove it, as shown in the video. Now, remove the air filter located on the air box, then disconnect the spark plug connectors to remove them as well (using a socket spanner with an extension), following the video tutorial to the end!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Rsv 1000 To replace the spark plugs on the Aprilia RSV 1000, you need to lift the fairing section where the fuel cap is located, just below the handlebars. He…
Rsv 1000 To replace the air filter in an Aprilia RSV 1000, loosen the bolts securing the side panels at the front of the bike. This will allow you to remove t…
Rsv 1000 To replace the spark plugs on the Aprilia RSV 1000R, first, remove the bolts securing the fuel tank at the front of the motorcycle. These bolts are l…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos