Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's steps will show you how to remove or clean the engine air filter on an Aprilia RSV4 1100. First, place the bike on a stand and start by removing the passenger seat and then the rider's seat by unscrewing the bolts; then unscrew the bolts of the air filter on the airbox to remove it, as shown in the video. At this point, clean the air filter or replace it if necessary; install the filter in the correct orientation in the airbox and finally reattach the rider's seat and then the passenger seat.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on an Aprilia RSV4 1100
How to Change the Engine Oil and Oil Filter on an Aprilia RSV4 1100
Rsv4 1100 This guide will show you the procedure for changing the engine oil and oil filter while performing the routine maintenance service on the Aprilia RSV…
How to replace the battery of the Aprilia RSV4 1100
How to replace the battery of the Aprilia RSV4 1100
Rsv4 1100 Today we will discover the necessary instructions to disassemble and replace the battery of the Aprilia RSV4 1100 motorcycle, in simple and quick ste…
How do you replace the levers of the Aprilia RSV4 1100?
How do you replace the levers of the Aprilia RSV4 1100?
Rsv4 1100 In order to replace the levers of the Aprilia RSV4 1100, you need to loosen the screws that secure these components to their housing, which are locat…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos